*/
#include <arch.h>
#include <asm_macros.S>
+#include <assert_macros.S>
#include <cadence/cdns_uart.h>
- .globl console_core_init
- .globl console_core_putc
- .globl console_core_getc
- .globl console_core_flush
+ /*
+ * "core" functions are low-level implementations that don't require
+ * writable memory and are thus safe to call in BL1 crash context.
+ */
+ .globl console_cdns_core_init
+ .globl console_cdns_core_putc
+ .globl console_cdns_core_getc
+
+ .globl console_cdns_putc
+ .globl console_cdns_getc
/* -----------------------------------------------
- * int console_core_init(unsigned long base_addr,
- * unsigned int uart_clk, unsigned int baud_rate)
+ * int console_cdns_core_init(uintptr_t base_addr)
* Function to initialize the console without a
* C Runtime to print debug information. This
* function will be accessed by console_init and
* the HW (baud, ...) and only enable the trans-
* mitter and receiver here.
* In: x0 - console base address
- * w1 - Uart clock in Hz
- * w2 - Baud rate
* Out: return 1 on success else 0 on error
* Clobber list : x1, x2, x3
* -----------------------------------------------
*/
-func console_core_init
+func console_cdns_core_init
/* Check the input base address */
cbz x0, core_init_fail
- /* Check baud rate and uart clock for sanity */
- cbz w1, core_init_fail
- cbz w2, core_init_fail
/* RX/TX enabled & reset */
mov w3, #(R_UART_CR_TX_EN | R_UART_CR_RX_EN | R_UART_CR_TXRST | R_UART_CR_RXRST)
core_init_fail:
mov w0, wzr
ret
-endfunc console_core_init
+endfunc console_cdns_core_init
+
+#if MULTI_CONSOLE_API
+ .globl console_cdns_register
+
+ /* -----------------------------------------------
+ * int console_cdns_register(console_cdns_t *console,
+ uintptr_t base, uint32_t clk, uint32_t baud)
+ * Function to initialize and register a new CDNS
+ * console. Storage passed in for the console struct
+ * *must* be persistent (i.e. not from the stack).
+ * In: x0 - UART register base address
+ * x1 - pointer to empty console_cdns_t struct
+ * Out: return 1 on success, 0 on error
+ * Clobber list : x0, x1, x2, x6, x7, x14
+ * -----------------------------------------------
+ */
+func console_cdns_register
+ mov x7, x30
+ mov x6, x1
+ cbz x6, register_fail
+ str x0, [x6, #CONSOLE_T_CDNS_BASE]
+
+ bl console_cdns_core_init
+ cbz x0, register_fail
+
+ mov x0, x6
+ mov x30, v7
+ finish_console_register cdns
+
+register_fail:
+ ret x7
+endfunc console_cdns_register
+#else
+ .globl console_core_init
+ .globl console_core_putc
+ .globl console_core_getc
+ .globl console_core_flush
+ .equ console_core_init,console_cdns_core_init
+ .equ console_core_putc,console_cdns_core_putc
+ .equ console_core_getc,console_cdns_core_getc
+#endif
/* --------------------------------------------------------
- * int console_core_putc(int c, unsigned long base_addr)
+ * int console_cdns_core_putc(int c, uintptr_t base_addr)
* Function to output a character over the console. It
* returns the character printed on success or -1 on error.
* In : w0 - character to be printed
* Clobber list : x2
* --------------------------------------------------------
*/
-func console_core_putc
- /* Check the input parameter */
- cbz x1, putc_error
+func console_cdns_core_putc
+#if ENABLE_ASSERTIONS
+ cmp x1, #0
+ ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+
/* Prepend '\r' to '\n' */
cmp w0, #0xA
b.ne 2f
tbnz w2, #UART_SR_INTR_TFUL_BIT, 2b
str w0, [x1, #R_UART_TX]
ret
-putc_error:
- mov w0, #-1
- ret
-endfunc console_core_putc
+endfunc console_cdns_core_putc
+
+ /* --------------------------------------------------------
+ * int console_cdns_putc(int c, console_cdns_t *cdns)
+ * Function to output a character over the console. It
+ * returns the character printed on success or -1 on error.
+ * In : w0 - character to be printed
+ * x1 - pointer to console_t structure
+ * Out : return -1 on error else return character.
+ * Clobber list : x2
+ * --------------------------------------------------------
+ */
+func console_cdns_putc
+#if ENABLE_ASSERTIONS
+ cmp x1, #0
+ ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+ ldr x1, [x1, #CONSOLE_T_CDNS_BASE]
+ b console_cdns_core_putc
+endfunc console_cdns_putc
/* ---------------------------------------------
- * int console_core_getc(unsigned long base_addr)
+ * int console_cdns_core_getc(uintptr_t base_addr)
* Function to get a character from the console.
* It returns the character grabbed on success
- * or -1 on error.
+ * or -1 if no character is available.
* In : x0 - console base address
+ * Out: w0 - character if available, else -1
* Clobber list : x0, x1
* ---------------------------------------------
*/
-func console_core_getc
- cbz x0, getc_error
-1:
+func console_cdns_core_getc
+#if ENABLE_ASSERTIONS
+ cmp x0, #0
+ ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+
/* Check if the receive FIFO is empty */
ldr w1, [x0, #R_UART_SR]
- tbnz w1, #UART_SR_INTR_REMPTY_BIT, 1b
+ tbnz w1, #UART_SR_INTR_REMPTY_BIT, no_char
ldr w1, [x0, #R_UART_RX]
mov w0, w1
ret
-getc_error:
- mov w0, #-1
+no_char:
+ mov w0, #ERROR_NO_PENDING_CHAR
ret
-endfunc console_core_getc
+endfunc console_cdns_core_getc
+
+ /* ---------------------------------------------
+ * int console_cdns_getc(console_cdns_t *console)
+ * Function to get a character from the console.
+ * It returns the character grabbed on success
+ * or -1 if no character is available.
+ * In : x0 - pointer to console_t structure
+ * Out: w0 - character if available, else -1
+ * Clobber list : x0, x1
+ * ---------------------------------------------
+ */
+func console_cdns_getc
+#if ENABLE_ASSERTIONS
+ cmp x0, #0
+ ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+ ldr x0, [x0, #CONSOLE_T_CDNS_BASE]
+ b console_cdns_core_getc
+endfunc console_cdns_getc
/* ---------------------------------------------
* int console_core_flush(uintptr_t base_addr)
+ * DEPRECATED: Not used with MULTI_CONSOLE_API!
* Function to force a write of all buffered
* data that hasn't been output.
* In : x0 - console base address
projects / project / bcm63xx / atf.git / commitdiff